three mppt smart Chargers are working in parallel with the system.,100/30+100/30+75/15 Why is 75/15 not visible on the Vrm dashboard?
asked
Why is 75/15 mppt smart charger not visible on the VRM dashboard?
It needs to be networked to your GX device
İt is networked by Bluetooth to the System , but with cerbo gx connection there is no cable connection of 75/15 , but it Have only Bluetooth connection..Is there a different solition?
Does the cerbo gx have a bluetooth connection, can't we plug a bluetooth dongle into the cerbo gx?
Bluetooth on a cerbo is intended to connect third party devices, like ruuvi tags, and on many cerbos requires a dongle. Much of this is documented in the various manuals.
Victron devices are to be connected via ve.direct or CAN to a Cerbo.
Bluetooth is just too unreliable for comms.
From the manual:
Bluetooth functionality is intended to be used to assist with initial connection and networking configuration. You cannot use Bluetooth to connect to other Victron products (e.g. SmartSolar charge controllers).
Thanks ...
