question

Mark Anderson avatar image
Mark Anderson asked

Grounding/bonding mixed dc systems to rv

Hi all


Just installing 48v system in my rv (solar + shore power inputs)

Infused about grounding.

If I connect my battery negative to chassis, isn’t anything else I connect to chassis effectively connected to battery negative?

Biggest concern is vehicle is electronics. What happens if I have a fault and 48v goes for the chassis? That’s also going to my starter battery and vehicle electronics.


Anyone got a good guide on correct way to ground/bond?

Grounding48v battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

I understand your concern. But it's a non issue.

The AC will also have a chassis ground. On neutral. Much higher than your batteries.

The positive side should be correctly fused. If you wish add a DC breaker to that side.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic