question

looknow12 avatar image
looknow12 asked

Mopeka Tank Sensors Temp in Celsius

Under the Cerbo Settings, I am configured for Fahrenheit, yet in the menus, or online with VRM it shows only Celsius. Is there another setting for this?

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
pwfarnell avatar image
pwfarnell answered ·

This was raised some time ago and Victron said it was on their radar to fix it but I do not know if they got around to doing it yet or not. Do you have the latest firmware, V2.94, if not upgrade and see if that solves the issue. If you have 2.94 or it does not fix the issue then it will come at some point. I work in centigrade so can not tell.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

looknow12 avatar image
looknow12 answered ·

I do have the latest v2.94 firmware

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.