question

nimbl avatar image
nimbl asked

2 temperature sensors to control one temperature control relay

I would like to use 2 Ruuvi temperature sensors to do an "If, then" situation with a fan relay. I would like my temperature relay to trigger if sensor one is above X temperature and sensor 2 is above Y temperature. For example, if the electronics compartment sensor is above 90 degrees AND the outside temperature sensor is above 60 degrees trigger temperature relay 1. I want to blow the hot air from the compartment out in the summer only. Is this possible?

Temperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

I did something similar using an Arduino.

I'll move this to the modifications space and try to find my post on it.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
@NIMBL

I can't find the post. Let me know if you would like the code

1 Like 1 ·
nimbl avatar image
nimbl answered ·

I have very little experience coding. I looked at the Arduino but I have no idea where I would start.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor