Venus OS 2.8x CAN Service

Question

question

stromos asked Mar 10, '22

hello all,

my base:

PI3

CAN HAT from Waveshare (2CH)

Venus OS 2.84

Pylontec 2000 connected via CAN

I have set up the CAN hardware so far

and the data is flowing

But unfortunately the battery is not displayed in the system.

Since 2.8 all old instructions in the net are not valid any more - unfortunately I don't get further from here :-( ...

Please for some help

Andreas

Venus OS

candump.jpg (83.2 KiB)

config.jpg (36.5 KiB)

startup.jpg (77.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-03-10T08:09:38Z

stromos answered · Mar 10, 2022 at 08:09 AM

Screen from the GUI

no-bat-monitor.jpg (46.2 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.