question

qv144 avatar image
qv144 asked

WHAT IS THE PORT TO PLUG IN THE 2 WIRE AUTOSTART TO

i have a yamaha efi gen with an autostartmodule installed, can cross the 2 wires to start the gen, disconnect to stop...inside the easysolar there are a number of ports aux 1 aux 2 etc, which one do i plug the 2 wires into for the gen start/stop

Generator
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@qv144

It rather does depend on your programming on the Victronbif you want to use the inverter relays.

The easiest setup is the GX color control though using the relay at the back. Then you can interact with the generator from the screen.

https://www.victronenergy.com/media/pg/Venus_GX/en/gx---generator-auto-start-stop.html

https://www.victronenergy.com/upload/cache/1580827279_upload_documents_1550_1000-Color%20Control%20backside%20with%20cables.jpg

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.