question

hhau avatar image
hhau asked

Multiplus 12/800/35 reading of start battery voltage on Cerbo GX and VRM

Hello

New to the victron world.

Got a new Multiplus 12/800/35 for our boat with seperate house and start batteries, I'm trying to get a voltage reading from the starter battery (connected to the 1A charge port), but dont see it anywhere, I only get the house voltage on GX and I would like to see whats going on, on the start battery.

Did I miss something?

Br

Henrik

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

There are no Voltage or current measurements made for that terminal. It only serves to trickle charge a start battery.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

hhau avatar image
hhau answered ·

@WKirby thanks for clarifying that, I'll use my aux input on my shunt then.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.