question

coyoteandlizard avatar image
coyoteandlizard asked

Total network power on bmv app

I wish the bmv-712 would show total network power/ total PV power as well as net power. Maybe even add a line for each charge controller included in the network. It would be significantly better to have a single source for all of this information. The ability to rename the components would also improve the usefulness of the app. That way I could name a charge controller something like "South Array" and be able to compare differences easily.


MPPT ControllersBMV Battery MonitorSmartShuntVictronConnectVE.Smart Network
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
bathnm avatar image
bathnm answered ·

What you are describing is what the VenusOS is for. You can either purchase as a complete unit with display, such as the Cerbo GX or use a Raspberry Pi and just run the software. If you go down the Raspberry PI route then you also need a lid of VE.Direct to USB converters

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Victron BMV battery monitors product page

VictronConnect Manual

Download for iOS / Android / Mac / Windows

Additional resources still need to be added for this topic


Additional resources still need to be added for this topic

VE.Smart Networking Manual