question

Christopher A avatar image
Christopher A asked

Multiplus connected to cerbo and MK3

The Multiplus just arrived. I'm adding it to a system with a Cerbo and a couple MPPT Smart charge cotrollers puls a BMV 712, all, hopefully, networked together. Do I need the MK3 to program the Multiplus or can it be done thru the Cerbo once connected via Cat5? Or am I missing other components here?

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Murray van Graan avatar image
Murray van Graan answered ·

You will need the MK3 to do a firmware update if the current firmware on the multi is not recent enough. Apart front that, all programming could be done via the VRM portal from the device list

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.