question

jmoone avatar image
jmoone asked

MPPT 100/50 what causes the Battery min to drop to 0.01V under history on the app?

We were using the generator for the air conditioner in our RV. All was fine for about an hour. Then I noticed the generator had dropped off the Inverter and was being powered by the lithium batteries. I also noticed the batteries temperature was well over 135 F. All systems were turned off. the generator isn’t communicating with the Inverter . Using the app under History/max/min the min is reading 0.01V? Any suggestions on trouble shooting Or what causes the min to drop to 0.01V?

MPPT Controllers
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rogerwilco avatar image rogerwilco commented ·

I'm getting the same 0.01V showing with a LiFePO4 battery.

0 Likes 0 ·
1 Answer
Mark avatar image
Mark answered ·

Sometimes this can occur during initial connection to the battery and power up.

Otherwise it may be 'real' and due to a temporary 'open circuit' condition between the MPPT output and battery - this could be due to a circuit breaker, BMS or wiring issue.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.