question

slewinson avatar image

Venus GX Digital I/O and Modbus

Hi all, have configured DI2 as a pulse meter and all is working as expected except that the Modbus TCP does not seem to return valid data.

Using FC:3 and addresses 3400 and 3402 on unit ID 2. No Modbus errors on the GX and the pulsemeter shows up as device 2 in the console.

I have tried using the Node-RED DBUS connector but had no success on getting a reliable connection.


Thanks in advance

Simon


Venus GX - VGXModbus TCP
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers