question

Dave Rae avatar image
Dave Rae asked

What cable to connect multiplus II 48/5000 to CCGX?

Hello, the UTP cable from a multiplus II/48/5000 to the CCGX, is that a standard patch cable pinout? It's not a cross over or something else, IE custom Victron pinout?

As I will be making my own...

Thanks again for your answers...

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Kevin Windrem avatar image
Kevin Windrem answered ·

I used a straight through CAT6 cable on my setup. No crossover.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Dave Rae avatar image Dave Rae commented ·

Thanks for that....

0 Likes 0 ·
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Drae

Please only use factory made cables, self made cables are notorious for giving hard to solve problems.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Dave Rae avatar image Dave Rae commented ·

Cheers thanks

0 Likes 0 ·