Feature Request : Public IP Address of Venus shown in VRM

Question

question

whnz asked May 2, '20

Feature Request : Public IP Address of Venus shown in VRM

VRM shows already the LAN/WiFi Address of the Venus device (in the device list), It would be good if it could also show the last public address as seen by VRM.

Help a few use cases for remote access type things on dynamic IP address internet connections.

feature request

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2020-05-03T01:16:54Z

Kevin Windrem answered · May 03, 2020 at 01:16 AM

You could use port forwarding and open up ports 80 and 81 for your use from the outside world.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

whnz commented · May 05, 2020 at 07:29 AM

yes, but that doesn't diminish this could be a useful feature. VRM likely already has this data, just needs to display it :)

0 ·

Answer 2 · 2021-02-23T09:16:06Z

Guy Stewart (Victron Community Manager) answered · Feb 23, 2021 at 09:16 AM

Hi @WHNZ,

You can find this information by adding the suffix /diagnostics to the end of the VRM site, then search for the attribute Remote ip

https://vrm.victronenergy.com/installation/xxxxx/diagnostics

(replace xxxxx with your 5 digit site).

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question