question

roberthudson859 avatar image
roberthudson859 asked

Buck Boost

I have purchased a victron system for my van conversion. I have a 50 amp buck/boost and the run from vehicle battery is 4.5m. I have at the moment a 200amph victron lifepo but intend to add another 200amph. What size cable should I use from vehicle battery to buck boost. I will upload my schematics


campervan
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

The RJ45 VE.Bus wire from the BMS to the cerbo GX is not needed.

0 Likes 0 ·
1 Answer
JohnC avatar image
JohnC answered ·

Hi @Roberthudson859@gmail.con

Cable size mm2 = A/3, for a quick calc. So 50/3 = 17 mm2. Or bigger.

But there's more to it than that: https://www.victronenergy.com/upload/documents/Wiring-Unlimited-EN.pdf


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic