Hello
I have the trouble to set the correct temperature correction value for a bluesolar ( firmware 1.16) 100/50. I have a 24v battery bank with two of this 12V batteries in serie. The manual indicates -30mv/K temperature correction for the cycle use.
Is it correct that in my case with 2x12V batteries = 24V bank I have to set the temperature correction to 2*-30mv/K = -60 mv/K?
The bluesolar doesn't accept the -60mv/K temperature correction value.
Is my calculation bad?
Thanks
p.s Sorry guys there is the link for the battery manual: https://www.apb-energy.fr/site/medias/batterie-solaire/UCG200-12.pdf
