Skylla TG 24V/50A without battery bench testing
Boost mode voltage adjustment OK up and down.
(switches set as per manual no battery connected)
Float mode voltage as soon as I started to adjust it the output voltage just decayed to nothing. (switches set as per manual no battery connected)
Checked mode switches operation with a multimeter - OK
removed and tested float potentiometer - works fine no glitches.
Turned off for a few days, then connected voltage sense wires to output in case that option helps.
Float voltage adjustment OK up and down for a short time. Subsequently the charger output just decayed to nothing.
Where do I get service manuals from please? Problems are easy to solve with a service manual and schematics. Without I will need to remove all the conformal coating and everything just takes an unnecessary long time. We also have three newer skylla-i 24/80 in operation which are probably out of warranty now.
