Hi!
In a Quattro-II installation we have 16A as shore power limit, but never see usage about above 13A when assist kicks in. Typically with assist the output still stay below 16A
Any ideas?
asked
Quattro II starts assisting below shore power limit
When Power Assist kicks in there's a minimum amount that it can apply. Your particular Multi is listed as 1.5A. So if you're just over the 16 it will drop to 14.5A.
I think there's also a safety margin at play too with the limit itself, so if that worries you, raise it to (say) 17A.
