question

ann-tatts avatar image
ann-tatts asked

Looking for wiring

Hi all

I’m trying to find pre-made wiring to hook up my newly purchased Victron smart solar charger Mppt 100/20

I don’t have equipment to make my own.


What I need are wires (6mm2) from m6 battery terminals to mppt with feruls(?) to fit connection (to connect to battery) & wires from mppt to mc4 connectors (to link solar panel).


I’ve been googling and can’t find anything.

Thankyou from newbie 12v system set up.


MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Do NOT use ferrules with MPPT's. Those ends should just be stripped neatly.

What about fuses and isolators?

Please ask a professional for help, breaking gear or causing a safety issue is just not worth it.

As a Victron community we have an obligation to encourage safe use of these products.

Without even basic tools you should not be attempting this by yourself.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.