Using the Victron Toolkit App, cannot find the LED Pattern in the video below:
asked
Multiplus II - LED Pattern not in LED Definitions
Hi @warwick
This error code can be found in the ve.bus sytem configurator:
It's 'error 11' see:
Edit: This is an error that will only take place in systems with a GX devices installed, and that is the best / easiest way to look into errors.
The above answer was wrong, it can also happen in systems without a GX device.
We'll add this led-code to the Toolkit App.
(if you have a GX device connected, this is still the easiest way to read-out errors)
