question

michaltylki avatar image
michaltylki asked

Connecting Lumel ND30IoT to EkranoGX

Hello.
I am trying to connect the Lumel ND30IoT network analyzer as a grid meter to the system managed by EkranoGX. ND30 supports Modbus TCP. Communication set to port 502 and address to 1. Unfortunately, Ekrano does not detect the analyzer. Has anyone connected Lumel to Ekrano before?
ekrano gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
ejrossouw avatar image
ejrossouw answered ·

@michal.tylki These are the Victron supported grid meters and Lumel is not one of them. Maybe the modifications space is a better fit for this question.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

Supporting a standard protocol does not mean that it will automatically work, it needs support in the GX which is not present.

Moving to modifications.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

matt1309 avatar image
matt1309 answered ·

Hi @michal.tylki

Modifying this for your meter might work or at least be a good starting point:

dbus-modbus-client/carlo_gavazzi.py at master · victronenergy/dbus-modbus-client · GitHub



2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources


Ekrano GX product page.

Ekrano GX online manual

Ekrano GX datasheet

Additional resources still need to be added for this topic