question

aubs avatar image
aubs asked

How to connect 12/800/35 Multiplus to VE configure

Hi everyone, as the title how do I connect my 12/800/35 Multipass to VE configure

inverter current draw
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

VE.Bus port at Multi -> RJ45 patch cable -> MK3 interface -> USB-port

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

aubs avatar image aubs ·

Thanks, Its just that I thought I didn’t require anything else to connect as it was built in.

0 Likes 0 ·
carlos-santos avatar image
carlos-santos answered ·

I would to configure the system like this. Charging the battery only with the excess of solar source and discharging the battery only by night when there is no solar source at all. During the day I'm not interested to discharge the battery if there is not excess of solar source.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.