tacking-destiny avatar image
tacking-destiny asked

IP65 Display.

When my battery charger is off, my lithium bank reads 12.4 volts. As soon as I turn it on, the Victron IP65 shows 13.8 volts and goes to a one amp charge. Float? If I turn off the charger, it goes back to showing a 12.4 volt charge on a second meter. I assume this is has something to do with where my cables are connected but… I am replacing an IP44 and it’s wired to the same terminals as before. The IP44 read the battery correctly and would throw 40 to 50 amps at that battery level.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Skylla-IP65 product page (12v, 24v)

Skylla-i product page (24v)

Skylla-TG Charger product page (24v, 48v)

Skylla-TG GMDSS product page (24v)

Additional resources still need to be added for this topic