question

harry4516 avatar image
harry4516 asked

MPPT 100/20 shuts OFF on a sunny day

I have a couple of charge controllers, MPPT 250/100, 250/70, 150/35 and three MPPT 100/20.

The MPPTs 100/20 sometimes shuts off during normal operation, see this picrture:

mppt10020.png

at 14:00 you see the graph going to 0, then it stays at 0 to 5 watts. When I disconnect the solar panels, and reconnect it, then it works again as expected. I did that so minutes later, when the graph goes up to the normal power.

I know three people in our city having exactly the same problem, also with MPPT 100/20.

All my three MPPT 100/20 are BMS controlled via Cerbo. So if any shut-off condition occurs, I would expect that all charge controller are deactivated by the Cerbo, but it is only one or the other, randomly.
Since I am not alone with this issue, I wonder what could be the reason for this shut-off, and why do I have to disconnect/reconnect the solar panel to get it working again?

It only happens with the MPPT 100/20, not with the others, and there is no error message recorded.

MPPT ControllersMPPT SmartSolar
mppt10020.png (23.8 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Nicolas Trejahn avatar image
Nicolas Trejahn answered ·

Not sure if it addresses your specific problem but you might want to have a look here: https://community.victronenergy.com/questions/285628/mppt-7510-randomly-stops-working.html. The new firmware fixes problems which sound like yours.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.