Charger only mode

Question

question

stefunko asked Jan 22, '24

Inverter RS 48/6000 Smart Solar with a remote switch for “Charger only mode“.

Is it possible to do it for a system with Pylontech battery US3000C and Cerbo GX?

According to manual 2-wire BMS mode can be used with L and H terminals connected

to a Victron battery BMS and turn only the inverter off.

I will rather use a manual switch and not to do it with a Victron Connect program.

Karol

smart solar set-up help

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-01-23T05:45:39Z

Dean Perry answered · Jan 23 at 05:45 AM

What's your goal for using "Charger Only" - energy saving or ???

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-01-23T09:10:55Z

stefunko answered · Jan 23 at 09:10 AM

Mainly safety reason when leaving house for a few days.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.