question

reggie-garcia avatar image
reggie-garcia asked

Replacing the PCB board to a quattro 8kVA inverter

Hi Dear. We are distributors of Victron Energy in Venezuela.


We replaced the PCB of an 8kVA/230V quattro inverter and after completing that work, the DC of the inverter was energized to turn it on and it failed to turn on. It was disassembled and reassembled a second time to rule out any problems but everything is fine.


We are suspecting the control card that receives the AC input, but what recommendations can you make to discard that card? Or how can we test the relay and the control transformer?


I will be attentive to your valuable comments.

quattro 10kva
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Justin Cook avatar image
Justin Cook answered ·

If you are indeed a Victron distributor, please reach out to your local Victron sales manager, as your sales manager will be able to put you in touch with Victron Repairs for troubleshooting steps and repair procedures!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic