question

nramsey avatar image
nramsey asked

BMV-602 not displaying current

My BMV-602 has stopped displaying current. I have just replaced all my battery and alternator wiring.

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

In replacing your wiring, are your sure that the shunt has not been bypassed in any way?
The other possibility is that one of the contacts on one of the RJ12 connectors is not making contact somehow and thus preventing shunt measurement from reaching the BMV.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nramsey avatar image
nramsey answered ·

Shunt isn't bypassed but a poor connection at the RJ12 is possible.

I don't know how to test that other than having a new end put on.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.