MultiPlus charged from grid (HUB-2 v3)?

Question

question

Lars Lindegaard Mikkelsen asked Jun 7, '19

We are testing a 3 phase offline MultiPlus 48/3000/35 system.

Issue: The system started to charge batteries at 03:00 at SOC = 48%?

Conditions:
- Load: OFF
- Grid: ON
- PV: OFF
- Not day 1 or 7 in repeated absorption mode.

Following 3 assistants are installed in all inverters:

Hub-2 v3

Relay (use to control non critical load)

Relay

VRM portal

Is it possible to attach the configuration file?

Best Regards,

Lars Lindegaard Mikkelsen

1559901061173.png (38.0 KiB)

1559901219504.png (9.2 KiB)

1559901229468.png (9.2 KiB)

1559901554220.png (26.0 KiB)

1559901913583.png (26.8 KiB)

1559902115311.png (27.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-07-03T13:17:40Z

Daniël Boekel (Victron Energy Staff) answered · Jul 03, 2019 at 01:17 PM

Your question was very vague, with no information about battery voltage and other conditions.

Did you fix your issues?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.