these two graphs on the VRM are showing the SAME voltage but the VE bus says current is zero where the correct current on system battery volatge is saying 1.9amps (I have checked this with a external INLINE amp meter and 1.9 amps is correct)

this differance is all the way across the graphs

this is on a MP II 48/5000 FW 459

anyone know why I suspect that this is causing the charger to keep pumping in 1.5 amps into my battery bank even when they are full at 56 volts then the voltage just keep going up.

I have a suspision that its the ESS assistant but I have not had time to test this , Ill do this over the weekend by removing the ess assistant and then seeing if the two become equall,

but if anyone has another test that I should carry out as well, please fire away with some suggestions.