SmartSolar MPPT 100/20 - load output

Question

question

effem asked May 30, '19

Hi, the output channel of this MPPT is 12V stabilized?

The voltage is stabilized to 12V or is variable and not there is difference with voltage of battery poles.

Thanks,

Francesco

MPPT Controllers

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

effem commented · May 30, 2019 at 09:11 AM

Tip: the LOAD output voltage

0 ·

Answer 1 · 2019-05-30T09:35:36Z

Elimac answered · May 30, 2019 at 09:35 AM

From my experience, you will see aproximately the same voltage as the battery has.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-05-30T10:32:54Z

effem answered · May 30, 2019 at 10:32 AM

Ok, so it is not stabilized at 12v.

Thanks,

Francesco

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Elimac commented · May 30, 2019 at 10:43 AM

The unit I have is actually being used in a 24V system, so, no, it would have to have two stabilizing stages, one for each voltage...

0 ·

Trina commented · Aug 05, 2020 at 12:08 AM

My 100/15-smart is whatever battery is as well, so can confirm that.

0 ·