I've got this MP-II 48V-5000VA-70 and three grid-tied single phase solar inverters from Growatt.
Since I inject the three outputs of the grid-tied inverters by script towards the D-Bus, I'm able to see my solar generation in the VRM. However since I misuse the phases for each solar inverter this is displayed as below. PV Omvormer L1 is a solar inverter, L2 the 2nd and L3 the 3rd. Why does the Multiplus II thinks that suddenly he is in a identity crisis en displays me 3 phases since I only have 1 phase?
