I’m connecting 14KwH of Pylontech to a Multiplus 2 5000/70. It will act as AC charger, and my Solaredge MPPT will continue to look after the array. Why do I need a Lynx Distributor?
Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.
Depends on how you are connecting your Pylontec stack. The Distributor is just a neat safe way to combine DC components.
What is ESS training video
ESS Quick Installation Guide
ESS design and installation manual
MultiPlus-II Product page
MultiPlus-II 230V Datasheet
VE.Bus Error codes
Lynx Distributor product page
Lynx Power In product page
Lynx Shunt VE.Can product page
Lynx Smart BMS product page
74 People are following this question.
Multiplus II 3 phase ESS with Pylontech batteries - sometimes feed loads from grid while PV charge batteries
>10kVA and dedicated production meter
Prioritizing PV for charging routine.
Unbalanced load in a 2x Multiplus II 3000/48 system (Germany)
Limit charge current ESS