question

2mas avatar image
2mas asked

gx venus "AC input" see volt instead watt

Hello everyone

Is it possible to get input volts from the grid to appear on the display instead of Watt consumption under "AC input" as in picture below.

41vbolfcxsl-ac-sy580.jpg


Best regards

Thomas


Venus GX - VGX
41vbolfcxsl-ac-sy580.jpg (35.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
wkirby avatar image
wkirby answered ·

I think you would need to look at Guimods to enable your requirements.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kevin Windrem avatar image
Kevin Windrem answered ·

GuiMods will show voltage,current and frequency in the AC in and out tiles. It will also display power as a bar graph if you set the limits in the menu.screen-shot-2022-11-01-at-114450-am.png

https://github.com/kwindrem/GuiMods


screen-shot-2022-11-01-at-114450-am.png (81.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2mas avatar image
2mas answered ·

Thanks for your input, I will look in on GuiMods :-)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.