INew setup. have three panel banks: 325w, 700w and 600w. Two of the banks use Victron Smart controllers and the other a Morningstar TriStar. Per my BMV I am 160 Ah down on an 880 Ah house bank. Per both VictronConnect and clamp meter, my 700W bank is outputting 45 A to the bank, my TriStar is outputting 35A, but my 325W panel is outputting 0W and shows Float in Victron Connect. This panel has output 450Whr so far today in Bulk but dropped to Float recently wile other MPPTs are in Bulk All panels are in full sun, no shading.
Any ideas on why this is happening?
