question

yevgeniy avatar image
yevgeniy asked

model phoenix 12/24. when the power switch is turned on, it lights up (bulk) and after a few seconds goes into (failure + fast blinking Bulk) output voltage = 0V

Model phoenix 12/24. When the power switch is turned on, it lights up (bulk) and after a few seconds goes into (failure + fast blinking Bulk) output voltage = 0V.

when trying to configure settings:

Adjusting maximum bulk current.

Adjusting absorption voltage.

Adjusting float voltage.

- the system enters setting mode, but the output voltage remains zero


(Charger is brand new)



charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers