question

aminb avatar image
aminb asked

System - AC Genset graph in VRM

In "Advanced" menu of VRM portal, there is a graph named "System - AC Genset". I guess the data from this graph is coming from VE.Bus system. Yet, as my VE.Bus is a Phoenix 5000 mono-phase and my Genset is connected to 3 Multiplus (for tri-phase), I do not see the power brought by the genset in the VRM.

Yet, my genset load is monitored by an ET340 meter that could be connected to my CCGX via a Victron RS485 to USB interface cable. My question is:

How to display the data of the GenSet meter in this "System - AC Genset" graph in VRM using the Victron RS485 to USB interface instead of the VE.Bus connection?

Thanks for your help.

Generator
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi, have you already tried connecting that meter? And then configuring it to be a generator; in the Ccgx Energy Meter menu?


I expect it to just work like that.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.