question

monkerai avatar image
monkerai asked

How do you see Quattro 48/10000/140-2x100 internal temperature through Cerbo GX?

We have had a new 10kW off-grid system running 12 x Pylontech 3000 batteries, Quattro 48/10000/140-2x100 , Cerbo GX and SmartSolar MPPT RS 450/200. The system is in a small room and trying to see how i can monitor temperature of the Inverter over summer? Thanks

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

Add this new temp sensor


1639801506489.png


1639801506489.png (4.4 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Monkerai

You could use the temp sensor that comes with the Quattro and connect it to the 'temp sense' input of the Cerbo, a good place to mount the sensor would be close to the intake fans of the Quattro so you know the temperature of the inlet air.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.