question

john-lange avatar image
john-lange asked

150/75 mppt flashing boot after firmware update

I have a 150/75 mppt I bought in 11/2015, I did a firmware update recently and it gave an error saying that all old settings are lost. When I looked at the screen it was flashing "boot" I can't access it anymore. I took it to where I bought it and they said nothing can be done. Any ideas? I have replaced it with a new 150/70, but would like to use it for another system i have. It was rock solid till the update.

firmware update
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
tmartin000 avatar image
tmartin000 answered ·

What did the dealer you bought it from say they q=would do for you?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

john-lange avatar image john-lange commented ·

They said its not covered by warranty, and that victron would not take any responsibility. So basically I'd like to know if this is true so I won't do any updates a year after purchase.

It's from rainbow power nsw Australia, there a good company.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic