Good day,
I use the Relais output of my SmartSolar to switch on a 24V/1000W heating element to heat (minimum 2 hours) my 200l boiler if I have excessive SolarEnergy.
Since I have also a bunch of windmills, it does not work at Moonshine even if the Battery voltage is at 28V...
I like to see an option in the SmartSolar, which prevent a shutdown and disabling the Relais at night, hence the firmware should only check at night for the Battery voltage (other options do not make sense) and activate the Relais including the minimal-switch-on-time.
Thanks in advance
Michelle
