Michelle Konzack avatar image
Michelle Konzack suggested

Using the Relais on a SmartSolar to switch on a Heater (failed at Moonshine)

Good day,

I use the Relais output of my SmartSolar to switch on a 24V/1000W heating element to heat (minimum 2 hours) my 200l boiler if I have excessive SolarEnergy.

Since I have also a bunch of windmills, it does not work at Moonshine even if the Battery voltage is at 28V...

I like to see an option in the SmartSolar, which prevent a shutdown and disabling the Relais at night, hence the firmware should only check at night for the Battery voltage (other options do not make sense) and activate the Relais including the minimal-switch-on-time.

Thanks in advance


MPPT SmartSolarRelay
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

No Comments

Your Opinion Counts

Share your great idea, or help out by voting for other people's ideas.