question

solarone avatar image
solarone asked

Use grid based on loads with multi

Hi

I have Multi plus 24/3000 no ess installed ,is the follow possible if so how can it be done

Is is possible for the multi to ignore the ac input and just use the battery until large loads is turned on.

Example would be a load of 600w comes from battery no ac input but if a load of 1800w is used then it’s taken from the grid with battery’s

When 1800w load has gone ac is ignored again and power supplied from battery

Thanks

@mvader (Victron Energy Staff) @Paul B @Guy Stewart (Victron Energy Staff)@JohnC

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
boekel avatar image
boekel answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.