question

mciftci avatar image
mciftci asked

HUB-1 Assistant for mobile applications ??

Hello everyone,

we are installing the multi 2 in a mobile application, where the system will be run 90% of time off-grid and 10% of time on-grid. That means there won't be any feedback in to the grid. But the grid will be connected to get AC-Power for the loads. (So we want to get the ac-power directly, not through the battery)


self-consumption-hub-1-policy.png

Is the HUB-1 suitable for this mobile application?

If not, which assistant would you prefer instead?

If yes, which policy would be the best option?


Best regards.


Melih Ciftci

Multiplus-II
self-consumption-hub-1-policy.png (47.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
porcini avatar image
porcini answered ·

The multi does this out of the box, this is what it was made for. No assistants needed :)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.