Victron Phoenix 12/50 Resistance values

Question

question

visual asked Jan 20, '21

Victron Phoenix 12/50 Resistance values

Hello together,

is it possible to get the values of the Resistors?

my Charger get up to 16,X Volts and like seen on the Picture, there are 3 burned resistors.

i dont know if the resistors are the reason or the impact for the problem so in first step i want to change the burned ones.

Kind regards
Daniel

charger battery system voltage

img-20210120-171653-resized-20210120-061400456.jpg (1.3 MiB)

img-20210120-171702-resized-20210120-061400262.jpg (462.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2021-01-24T18:06:48Z

jack2006 answered · Jan 24, 2021 at 06:06 PM

Unfortunatly my charger is a 24V 25A but the control board looks similar to yours however these may be diffferent:- R160 is a 220 Ohm 2W, the resistor you have burnt is 1K ohm 0.6W, both look to be metal film.

Hope this helps, John

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question