question

chris2sox avatar image
chris2sox asked

Bulk charge light flashing

I have a Multiplus 24/3000/70 and I noticed the Bulk light flashing whilst I had been running my generator for about an hour and the genny showing a zero load. I could not find this condition in the user manual. I have had this set up for 15 years so this is not a new thing for me to do. Later on I started the genny again and no flashing Bulk light and normal charging. What was the flashing light about? Any help appreciated.

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Take a look into the Victron ToolKit App. There you can check additional LED codes.

Blinking "bulk" means "bulk protection" - the Multi is charging in bulk more than 10h without reaching the absorption voltage.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.