question

pattimichelle avatar image
pattimichelle asked

correct switch setting on SS MPPT 150-60tr

I have simple flooded (not sealed) lead acid batteries, and I believe the default rotary switch postion (#2) is correct for these. But I wanted to ask to double check that the absorb/float and balance operations are being done correctly.

Thank you very much!

PattiM

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @PattiMichelle

Please check the battery documentation for this, and check if the setting you want to use is good for it.

When in doubt, ask the battery supplier.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.