AC out 2 is not monitorized separately than AC out 1

Question

question

focus11 asked Feb 4, '24

AC out 2 is not monitorized separately than AC out 1

Hi everybody!

I have a sistem with 2 Fronius inverters, 1 Multiplus 2 and Pylontech batteries, configured like in pictures below.

I have also an ET112 installed at the head of grid.

When I have consumption on AC out 2 (around 3000w), that consumption is added together with that on AC out 1 and displayed in the application under "Critical Loads".

What can I do to see those values displayed separately, each in its place?

Something is installed or programmed wrong?

Thank you in advance!

ac-out-2

1000052723.jpg (359.6 KiB)

1000052724.jpg (298.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2024-02-04T05:38:35Z

Matthias Lange - DE answered · Feb 04 at 05:38 AM

There is no extra current sensor for the AC Out 2.

You could add another ET112 for that but I'm not sure if it will be shown separately on the dashboard.

I think you will only be able to see that in the advanced view.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question