Quattro gen on ac2in whant to set to only charger and no pass through

Question

This question was closed Jan 17 at 05:41 PM by Justin Cook for the following reason: The question is answered, right answer was accepted

question

2mas asked Jan 10, '24

hallo

I have a setup where my quattro has connected a generator on AC2 IN, I would like it to only charge the batteries and let the inverter pull the load

how to set that in config???

best

MultiPlus Quattro Inverter Charger

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE answered · Jan 10 at 05:08 PM

That's not possible, you can't use AC IN (1 or 2) to charge and use the inverter at the same time.

Charging and inverting uses the same electronics.

img-20240110-180404.jpg (224.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-01-10T20:38:44Z

2mas answered · Jan 10 at 08:38 PM

Thanks for your respons :-)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.