question

kristian-flodin avatar image
kristian-flodin asked

Multiplus 5000 24V - which is the ve bus port?

On my MP 5000/24,there are two unmarked RJ45 sockets right next to the AC connections. However, these are not labeled in any way, either in the documentation or on the MP itself. I need to connect both the ve bus and the can for a bms - but which is which?

VE.Bus
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

They are both VE.Bus. There are two connectors to enable loop through to the next device in a chain.
There are no VE.CAN (or CANBUS) connectors on a MultiPlus.

CAN for a BMS will connect to the CAN or VE.CAN connectors which are presented on a Venus device such as CCGX or VenusGX.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources