if MP2 is in zero export and my AC pv in input side has more than my required power let say 2000 watts AC from inverter and im using 1500 watts on my appliances, The excess 500 watts will be convert by MP2 to charge my battery? about 9-10 amps?(battery not in full charge) is the charging current be variable depending on the excess power generated by the GT inverter zero export.
What you want to do is possible with ESS.
Study the ESS guides and manuals to figure out what additional equipment you might need to get iyour system set up optimally.
Hi @jackcactus,
This depends on how you have setup the system. Are you using energy meters:
https://www.victronenergy.com/accessories/energy-meter
Did you setup ESS correctly:
https://www.victronenergy.com/live/ess:design-installation-manual
If this is unfamiliar to you then I would advise you to contact a Victron dealer to help you with this.
if you do not know who your dealer is, please visit: https://professional.victronenergy.com/support/
best regards
Martijn Coster - Victron Energy
