question

andreas-easysolar avatar image
andreas-easysolar asked

EasySolar 12/1600 keine AC out Spannung wenn kein Netzeingang

Ich würde das Gerät gerne im Wohnmobil verwenden. Habe den Easysolar jetzt zur Probe an zwei parallelgeschaltete Starterbatterien gehängt. Es werden keine Störungen angezeigt, trotzdem liegt ohne Netz keine AC Spannung an. Ich bedanke mich schon mal im Voraus für die Hilfe.

MfG Andreas

image.jpg


EasySolar All-in-One
image.jpg (5.5 MiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
andreas-easysolar avatar image
andreas-easysolar answered ·

image.jpgDie rote LED auf der Platine (im Bild über der Klemmleiste) zeigt Dauerlicht, dazu habe ich auch keine Information gefunden. Die ist bei geschlossenem Gehäuse nicht sichtbar.


image.jpg (3.0 MiB)
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·
Die LED unten zeigt nur an, ob das Relais daneben (das orangene Teil) aktiv ist oder nicht.
0 Likes 0 ·
andreas-easysolar avatar image andreas-easysolar Matthias Lange - DE ♦ commented ·
Herzlichen Dank für die Information.

MfG Andreas

0 Likes 0 ·
phoenix-is-it avatar image
phoenix-is-it answered ·

Was ist denn bei dem Reiter „Wechselrichter“ eingestellt?

Welche „Fernbedienung“ ist dort angeschlossen? (Siehe dein Bild: Fernbedienung hat Vorrang)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

andreas-easysolar avatar image
andreas-easysolar answered ·

Vielen Dank.

Fehler gefunden: merkwürdigerweise war der FI war nicht ordentlich eingerastet.

Mfg Andreas

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.