GuiMods -> Remaining Time

Question

question

gexle asked Feb 25, '23

GuiMods -> Remaining Time

Hello Kevin

Is the Remaining time no longer displayed here?
Pylontech US5000 Canhat BMS

Thanksk you

gui mods

unbenannt.jpg (67.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

gexle answered · Feb 26, 2023 at 07:07 AM

@Kevin Windrem

Is that ok? You can see it in the Github on the Screen Shot Detail Battery.png

Thanks

3

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Kevin Windrem commented · Feb 26, 2023 at 05:10 PM

Remaining time is working on my system using a SmartShunt for battery monitor. Remaining time is limited to a maximum of 10 days so with the low 4 watt power draw it may be your battery life is more than 10 days. So a blank remaining time would be normal.

I will update GuiMods so that in this case the remaining time is shown as > 10 days

1 ·

gexle Kevin Windrem commented · Feb 26, 2023 at 05:18 PM

Thanks

0 ·

Kevin Windrem Kevin Windrem commented · Feb 27, 2023 at 06:24 PM

I looked at the code and system behavior. The TimeToGo dbus parameter (at least for my SmartShunt) goes invalid for values more than 10 days. So I have no way to differentiate between an undefined TTG or one that's just more than 10 days.

So blanking the value is technically the right thing to do.

0 ·

Modifications Space

Node Red Space

Answer 1 · 2023-02-28T05:05:29Z

gexle answered · Feb 28, 2023 at 05:05 AM

Hello Kevin

I understand then that's ok.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question